Advance Budget and Costing (VA073_)

Rebuild the module with updated NuGet Packages and done necessary code changes to make compatible with Vienna Advantage Framework version 5.0 and above.  

Note:- This version and all future versions of this module will be compatible with Vienna Advantage Framework version 5.0 and above. If you are using Vienna Advantage Framework 4.X.X.X then, do not install this version.  

Module Dependency

Vienna Advantage Standard (VAS_) <1.0.1.0>

1. Added two fields Per unit Cost, Total Cost ,marked UOM read only on Task Activity Tab on Maintenance Work Order Window. 

2. Added new fields cost drivers  ,UOM on Task Schedule Tab in Maintenance Work Order Window 

3. Bind the callout on Task Activity tab on cost driver and hours filed. 

4. Work over callout for task activity tab for showing the per unit cost on Task Activity tab on the selection of cost driver and hours (total cost will update). 

5. Work over the Task Activity for calculating the total cost on all parent-sub parent  tabs 

6. Changes done on task activity when record deleted total cost will be updated. 

Production Order Cost Process 

1. Create Production Order Cost in complete stage when Quantity Assembled is greater than ZERO on production Order Window. 

2. Update Raw Material Cost and Cost Driver cost at Production Order Cost header tab from the line tab. 

1. Done DB changes on Document Type Window : field Manufacturing Expense added 3 values to List

a) Additional Material Consumption 

b) Starting & Ending 

c) Stock Write Off  

2. Create Work Center Cost line created with output_k and output_m if the cost available against the ledger code linked with the cost driver. Also moved the cost on production order cost window for output_k and output_m.

3. If the cost available against the machine cost driver (with ledger code) and recorded time is not available now the system will generate the machine cost driver at work center cost. 

1. Correction in  Production Order Consumption for FG) Print, Addes Cost center and work center in Parameter and print.